我公司已经使用Avocent ACS(高级控制台服务器)进行网络设备的控制台管理已有多年了。我使用的是4000、5000和6000系列,现在8000系列正在刷新一些旧的系列。

艾默生(EMR)于2009年10月以12亿美元的价格收购了基础架构管理专家Avocent Corporation(AVCT)。此后,Emerson将Aperture和Avocent的新业务合并为一个新部门,致力于帮助数据中心客户更好地管理其基础架构。现在,它是作为独立业务推出的Vertiv的一部分。 Vertiv的Trellis DCIM平台是第一个使用实时数据来增强数据中心管理的平台,并且被公认是Gartner发布的每个DCIM Magic Quadrant的领导者。

有趣的是,我什至找不到Avocent产品, Vertiv的产品页面。 IT管​​理类别下共有13个产品,但没有ACS产品线。我设法在Google上找到了一个链接,该链接在此链接上显示了更多该产品: //www.vertivco.com/en-us/products-catalog/monitoring-control-and-management/it-management/avocent-acs-8000-serial-consoles/

 

艾默生Avocent ACS8000正面


“Avocent®ACS 8000高级控制台服务器系列通过一个全新的创新平台,延续了长期的成功案例,该平台集成了重要的新连接功能,例如千兆光纤,USB和传感器。 IT专业人员和网络运营中心(NOC)人员现在可以利用这些新功能来进一步使他们能够在全球任何地方对IT资产执行安全的远程数据中心管理和带外管理。更新后的Linux操作系统和DSView™管理软件采用具有扩展内存功能的双核ARM处理器架构,为Avocent®ACS 8000提供了最佳的性能,安全性和可靠性,从而提供了完整的带外管理解决方案。” – from ACS 8000的数据手册.

这是我执行的一些基本配置步骤。

1.设备中的控制台以配置静态IP和网关

使用提供的RJ-45控制台之一
适配器,连接端子或
工作站到控制台端口。的
控制台系统使用
终端或带有会话的终端仿真器
设置为:9600、8,N和1,无
流 control.

以以下身份登录控制台系统 管理员,
使用默认密码 亲爱的。在
命令提示符下,输入wiz以查看
当前的IP configuration.

login: 管理员
Password:
Welcome to ACS8000 <ACS8032-0530044575>.
Type help for more information.
--:- / cli-> help


- Thank you for using the cli -
Some basic and useful keys are:
- tab (once/twice) - shows the next possible commands/option(s)
- up/down arrow - navigates up/down in the command history
- ls - shows sub-nodes
- show - shows available configuration in the node
- cntrl e - gets the current parameter value for editting
Other hints:
- Use backslash '\' to  escape spaces, '\' and other control
  characters when assigning values to parameters.



--:- / cli-> wiz
current ipv4 address: 0.0.0.0
current ipv6 address: fe80:0000:0000:0000:02e0:86ff:fe29:15a8
eth0:
device_status = enabled
ipv4_method = dhcp
ipv4_address = 192.168.160.10
ipv4_mask = 255.255.255.0
ipv4_default_gateway =
enable_lldp = no
ipv6_method = stateless
ipv6_address =
ipv6_prefix_length =
ipv6_default_gateway =
mac address: 00:e0:86:29:15:a8
dns:
primary_dns =
secondary_dns =
domain =
hostname = ACS8032-0530044575
ipv6:
Note: Enabling or disabling IPv6 requires a reboot to be effective.
enable_ipv6 = yes
-- MORE --:
get_dns_from_dhcpv6 = no
get_domain_from_dhcpv6 = no

Some basic and useful keys are:
 - tab (once/twice) - shows the next possible option(s)
 - cntrl e - gets the current parameter value for editting
Other hints:
 - Use backslash '\' to escape spaces, '\' and other control
   characters when assigning values to parameters.

current ipv4 address: 0.0.0.0
current ipv6 address: fe80:0000:0000:0000:02e0:86ff:fe29:15a8
eth0:
device_status (disabled,enabled) [enabled] :
ipv4_method (dhcp,ipv4_address_unconfigured,static) [dhcp] :
enable_lldp (no,yes) [no] : yes
ipv6_method (dhcpv6,ipv6_address_unconfigured,stateless,static) [stateless] :
mac address: 00:e0:86:29:15:a8
dns:
primary_dns :
secondary_dns :
domain :
hostname [ACS8032-0530044575] : ACS-Vogell
ipv6:
enable_ipv6 (no,yes) [yes] : no
current ipv4 address: 0.0.0.0
current ipv6 address: fe80:0000:0000:0000:02e0:86ff:fe29:15a8
eth0:
device_status = enabled
ipv4_method = dhcp
ipv4_address = 192.168.160.10
ipv4_mask = 255.255.255.0
ipv4_default_gateway =
enable_lldp = yes
ipv6_method = stateless
ipv6_address =
ipv6_prefix_length =
ipv6_default_gateway =
mac address: 00:e0:86:29:15:a8
dns:
primary_dns =
secondary_dns =
domain =
hostname = ACS-Vogell
ipv6:
Note: Enabling or disabling IPv6 requires a reboot to be effective.
enable_ipv6 = no
-- MORE --:
get_dns_from_dhcpv6 = no
get_domain_from_dhcpv6 = no
Are all these parameters correct? (no, yes, quit)  [no] :
--:- / cli-> reboot
Rebooting the appliance will cause all currently active sessions to be disconnected.
Are you sure you want to reboot the appliance? (yes, no)  : yes
--:- / cli->
Broadcast message from [email protected] (Thu Apr  6 16:07:▒ 2017):
The system is going down for reboot NOW!
INIT: Sending processes the TERM signal

INIT: Sending processes the KILL signal
Stopping cacpd: cacpd.
stopping Busybox Periodic Command Scheduler: crond... done.
Signal Terminated sent to dial-in daemon.
Stopping GSP connection API daemon.
GSP Serial Daemon killed, PID file removed.
Stopping logpipe: logpipe.
Stopping power management service.
stopped process in pidfile '/var/run/pmdng.pid' (pid 2040)
Stopping wireless modem daemon.
Stopping Data Buffering daemon.
Stopping event notification:event_notify.
Stopping socket client daemon.
Stopping uicontrold: uicontrold.
Stopping adsap2d: adsap2d.
Stopping sshd:stopped /usr/sbin/sshd (pid 1365)
done.
Stopping web server: apache2.
stopping mountd: done
stopping nfsd: done
Stopping network management services:stopped /usr/sbin/snmpd (pid 1401)
no /usr/sbin/snmptrapd found; none killed
 snmpd, snmptrapd.
Stopping internet superserver: xinetd.
stopping statd: done
Stopping LLDP services
return code is 0
Stopping strongSwan IPsec...
Stopping aidpd: aidpd.
Stopping environd: environd.
Calling modprobe for IPv6
Deconfiguring network interfaces... ifdown: interface eth0 not configured
ifdown: interface eth1 not configured
done.
Stopping rpcbind daemon...
done.
Stopping NTP Clientstart-stop-daemon: warning: killing process 1996: No such process
.
Sending all processes the TERM signal...
Sending all processes the KILL signal...
[176577.522210] watchdog watchdog0: watchdog did not stop!
Syncing hardware clock to system time
Unmounting remote filesystems...
Unmounting local filesystems...
mount: can't find /mnt/ram in /etc/fstab
Rebooting... [176580.781823] reboot: Restarting system
U-Boot SPL 2015.01-00146-gae650bc (Sep 21 2016 - 12:18:56) ACS 1.17
qspi boot


U-Boot 2015.01-00146-gae650bc (Sep 21 2016 - 12:18:56) ACS 1.17

Board: 亲爱的 dedhamlpc
Status: SLC_RST (0x00080000)
I2C:   ready
DRAM:  ECC disabled 1 GiB
MMC:   zynq_sdhci: 0, zynq_sdhci: 1
SF: Detected W25Q64CV with page size 256 通过tes, erase size 4 KiB, total 8 MiB
In:    serial
Out:   serial
Err:   serial
SF: Detected W25Q64CV with page size 256 通过tes, erase size 4 KiB, total 8 MiB
SERIAL NO.: 0530044575
MPN:        500-253-501
LAN1:       00:e0:86:29:15:a8
LAN2:       00:e0:86:29:15:a9
SF: Detected W25Q64CV with page size 256 通过tes, erase size 4 KiB, total 8 MiB
Loading PL fabric from QSPI
PL loaded successfully
Net:   Gem.e000b000, Gem.e000c000
Hit any key to stop autoboot:  0
Booting from hw, image #1 VERSION=1.0.1.2278+529+20+11 ...
## PL loaded successfully
3338080 bytes read in 186 ms (17.1 MiB/s)
12940 bytes read in 32 ms (394.5 KiB/s)
## bootargs: console=ttyPS0,9600n8 root=/dev/mmcblk0p9 rw rootfstype=ext4 rootwait earlyprintk
## Booting kernel from Legacy Image at 02080000 ...
   Image Name:   的Linux-3.17.0-xilinx
   Image Type:   ARM 的Linux Kernel Image (uncompressed)
   Data Size:    3338016 通过tes = 3.2 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 02000000
   Booting using the fdt blob at 0x2000000
   Loading Kernel Image ... OK
   Loading Device Tree to 1fff9000, end 1ffff28b ... OK

Starting kernel ...

[    0.000000] Booting 的Linux 上 physical CPU 0x0
[    0.000000] 的Linux version 3.17.0-xilinx ([email protected]) (gcc version 4.9.2 (GCC) ) #1 SMP Wed Sep 21 11:59:27 CDT 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Dedham
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] PERCPU: Embedded 7 pages/cpu @eefd9000 s8192 r8192 d12288 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping 上.  Total pages: 260624
[    0.000000] Kernel command line: console=ttyPS0,9600n8 root=/dev/mmcblk0p9 rw rootfstype=ext4 rootwait earlyprintk
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1032756K/1048576K available (4555K kernel code, 209K rwdata, 1452K rodata, 232K init, 197K bss, 15820K reserved, 270336K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc05e606c   (6009 kB)
[    0.000000]       .init : 0xc05e7000 - 0xc0621000   ( 232 kB)
[    0.000000]       .data : 0xc0622000 - 0xc0656740   ( 210 kB)
[    0.000000]        .bss : 0xc0656740 - 0xc0687e90   ( 198 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] L2C: platform provided aux values match the hardware, so have no effect.  Please remove them.
[    0.000000] L2C-310 erratum 769419 enabled
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB
[    0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x46060001
[    0.000000] slcr mapped to f0004000
[    0.000000] zynq_clock_init: clkc starts at f0004100
[    0.000000] Zynq clock init
[    0.000008] sched_clock: 64 bits at 383MHz, resolution 2ns, wraps every 2868291043328ns
[    0.000094] timer #0 at f0006000, irq=43
[    0.000326] Console: colour dummy device 80x30
[    0.000344] Calibrating delay loop... 1528.62 BogoMIPS (lpj=7643136)
[    0.090170] pid_max: default: 32768 minimum: 301
[    0.090287] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.090298] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.090786] CPU: Testing write buffer coherency: ok
[    0.090947] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.091020] Setting up static identity map for 0x454318 - 0x454370
[    0.092384] CPU1: Booted secondary processor
[    0.130159] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.130223] Brought up 2 CPUs
[    0.130238] SMP: Total of 2 processors activated.
[    0.130243] CPU: All CPU(s) started in SVC mode.
[    0.130669] devtmpfs: initialized
[    0.132334] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.133004] regulator-dummy: no parameters
[    0.135614] NET: Registered protocol family 16
[    0.136387] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.137239] cpuidle: using governor ladder
[    0.137254] cpuidle: using governor menu
[    0.142187] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.142199] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.142303] zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xf0080000
[    0.149477] VCCPINT: 1000 mV
[    0.149874] vgaarb: loaded
[    0.149971] 亲爱的-acs-syscfg initialized. 32 ports
[    0.150421] SCSI subsystem initialized
[    0.150722] usbcore: registered new interface driver usbfs
[    0.150796] usbcore: registered new interface driver hub
[    0.150975] usbcore: registered new device driver usb
[    0.151250] EDAC MC: Ver: 3.0.0
[    0.152485] Switched to clocksource arm_global_timer
[    0.163795] NET: Registered protocol family 2
[    0.164498] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.164580] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.164706] TCP: Hash tables configured (established 8192 bind 8192)
[    0.164772] TCP: reno registered
[    0.164787] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.164836] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.165048] NET: Registered protocol family 1
[    0.165322] RPC: Registered named UNIX socket transport module.
[    0.165331] RPC: Registered udp transport module.
[    0.165338] RPC: Registered tcp transport module.
[    0.165344] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.165746] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[    0.166755] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.166840] audit: initializing netlink subsys (disabled)
[    0.166879] audit: type=2000 audit(0.150:1): initialized
[    0.168194] Registering unionfs 2.6 (for 3.17.0-rc1)
[    0.168652] fuse init (API version 7.23)
[    0.169075] msgmni has been set to 1489
[    0.169768] bounce: pool size: 64 pages
[    0.169834] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.169849] io scheduler noop registered
[    0.169860] io scheduler deadline registered
[    0.169890] io scheduler cfq registered (default)
[    0.170913] dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-2364208
[    0.170928] dma-pl330 f8003000.dmac:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.171642] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 6249999) is a xuartps
[    6.836936] console [ttyPS0] enabled
[    6.880011] Serial driver for Avocent FPGA based UARTs Rev: 3.12
[    6.951831] avctserial.0: ttyS1 at MMIO 0x40002000 (irq = 61, base_baud = 6250000) is a FPGA
[    7.052811] avctserial.0: ttyS2 at MMIO 0x40002020 (irq = 61, base_baud = 6250000) is a FPGA
[    7.153835] avctserial.0: ttyS3 at MMIO 0x40002040 (irq = 61, base_baud = 6250000) is a FPGA
[    7.254897] avctserial.0: ttyS4 at MMIO 0x40002060 (irq = 61, base_baud = 6250000) is a FPGA
[    7.355900] avctserial.0: ttyS5 at MMIO 0x40002080 (irq = 61, base_baud = 6250000) is a FPGA
[    7.456895] avctserial.0: ttyS6 at MMIO 0x400020a0 (irq = 61, base_baud = 6250000) is a FPGA
[    7.557937] avctserial.0: ttyS7 at MMIO 0x400020c0 (irq = 61, base_baud = 6250000) is a FPGA
[    7.658973] avctserial.0: ttyS8 at MMIO 0x400020e0 (irq = 61, base_baud = 6250000) is a FPGA
[    7.760007] avctserial.0: ttyS9 at MMIO 0x40002100 (irq = 61, base_baud = 6250000) is a FPGA
[    7.861044] avctserial.0: ttyS10 at MMIO 0x40002120 (irq = 61, base_baud = 6250000) is a FPGA
[    7.963112] avctserial.0: ttyS11 at MMIO 0x40002140 (irq = 61, base_baud = 6250000) is a FPGA
[    8.065201] avctserial.0: ttyS12 at MMIO 0x40002160 (irq = 61, base_baud = 6250000) is a FPGA
[    8.167279] avctserial.0: ttyS13 at MMIO 0x40002180 (irq = 61, base_baud = 6250000) is a FPGA
[    8.269343] avctserial.0: ttyS14 at MMIO 0x400021a0 (irq = 61, base_baud = 6250000) is a FPGA
[    8.371434] avctserial.0: ttyS15 at MMIO 0x400021c0 (irq = 61, base_baud = 6250000) is a FPGA
[    8.473504] avctserial.0: ttyS16 at MMIO 0x400021e0 (irq = 61, base_baud = 6250000) is a FPGA
[    8.575590] avctserial.0: ttyS17 at MMIO 0x40002200 (irq = 61, base_baud = 6250000) is a FPGA
[    8.677658] avctserial.0: ttyS18 at MMIO 0x40002220 (irq = 61, base_baud = 6250000) is a FPGA
[    8.779744] avctserial.0: ttyS19 at MMIO 0x40002240 (irq = 61, base_baud = 6250000) is a FPGA
[    8.881814] avctserial.0: ttyS20 at MMIO 0x40002260 (irq = 61, base_baud = 6250000) is a FPGA
[    8.983899] avctserial.0: ttyS21 at MMIO 0x40002280 (irq = 61, base_baud = 6250000) is a FPGA
[    9.085985] avctserial.0: ttyS22 at MMIO 0x400022a0 (irq = 61, base_baud = 6250000) is a FPGA
[    9.188058] avctserial.0: ttyS23 at MMIO 0x400022c0 (irq = 61, base_baud = 6250000) is a FPGA
[    9.290132] avctserial.0: ttyS24 at MMIO 0x400022e0 (irq = 61, base_baud = 6250000) is a FPGA
[    9.392204] avctserial.0: ttyS25 at MMIO 0x40002300 (irq = 61, base_baud = 6250000) is a FPGA
[    9.494279] avctserial.0: ttyS26 at MMIO 0x40002320 (irq = 61, base_baud = 6250000) is a FPGA
[    9.596360] avctserial.0: ttyS27 at MMIO 0x40002340 (irq = 61, base_baud = 6250000) is a FPGA
[    9.698441] avctserial.0: ttyS28 at MMIO 0x40002360 (irq = 61, base_baud = 6250000) is a FPGA
[    9.800495] avctserial.0: ttyS29 at MMIO 0x40002380 (irq = 61, base_baud = 6250000) is a FPGA
[    9.902577] avctserial.0: ttyS30 at MMIO 0x400023a0 (irq = 61, base_baud = 6250000) is a FPGA
[   10.004646] avctserial.0: ttyS31 at MMIO 0x400023c0 (irq = 61, base_baud = 6250000) is a FPGA
[   10.106736] avctserial.0: ttyS32 at MMIO 0x400023e0 (irq = 61, base_baud = 6250000) is a FPGA
[   10.208793] avctserial.0: ttyS33 at MMIO 0x40003000 (irq = 61, base_baud = 6250000) is a FPGA
[   10.310876] avctserial.0: ttyS34 at MMIO 0x40003020 (irq = 61, base_baud = 6250000) is a FPGA
[   10.413105] xdevcfg f8007000.devcfg: ioremap 0xf8007000 to f0064000
[   10.489812] brd: module loaded
[   10.528697] loop: module loaded
[   10.567101] m25p80 spi32766.0: s25fl064k (8192 Kbytes)
[   10.627756] 6 ofpart partitions found 上 MTD device spi32766.0
[   10.697426] Creating 6 MTD partitions 上 "spi32766.0":
[   10.758873] 0x000000000000-0x000000020000 : "qspi-fsbl-boot"
[   10.827403] 0x000000020000-0x000000040000 : "qspi-env"
[   10.888820] 0x000000040000-0x000000060000 : "qspi-env-backup"
[   10.957723] 0x000000060000-0x000000100000 : "qspi-uboot"
[   11.021280] 0x000000100000-0x000000101000 : "qspi-unitdata"
[   11.087818] 0x000000400000-0x000000800000 : "qspi-bitstream"
[   11.157685] libphy: XEMACPS mii bus: probed
[   11.207895] xemacps e000b000.ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[   11.295145] xemacps e000c000.ethernet: pdev->id -1, baseaddr 0xe000c000, irq 77
[   11.382312] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   11.460148] ehci-pci: EHCI PCI platform driver
[   11.513418] ULPI transceiver vendor/product ID 0x0424/0x0009
[   11.580911] Found SMSC USB334x ULPI transceiver.
[   11.636114] ULPI integrity check: passed.
[   11.684171] zynq-ehci zynq-ehci.0: Xilinx Zynq USB EHCI Host Controller
[   11.763209] zynq-ehci zynq-ehci.0: new USB bus registered, assigned bus number 1
[   11.872531] zynq-ehci zynq-ehci.0: irq 76, io mem 0x00000000
[   11.952500] zynq-ehci zynq-ehci.0: USB 2.0 started, EHCI 1.00
[   12.021002] hub 1-0:1.0: USB hub found
[   12.065084] hub 1-0:1.0: 1 port detected
[   12.112368] usbcore: registered new interface driver usb-storage
[   12.183928] usbcore: registered new interface driver usbserial
[   12.253609] usbcore: registered new interface driver usbserial_generic
[   12.331729] usbserial: USB Serial support registered for generic
[   12.403607] usbcore: registered new interface driver ftdi_sio
[   12.472348] usbserial: USB Serial support registered for FTDI USB Serial Device
[   12.560349] mousedev: PS/2 mouse device common for all mice
[   12.626832] i2c /dev entries driver
[   12.668582] cdns-i2c e0004000.i2c: 400 kHz mmio e0004000 irq 57
[   12.740624] rtc-ds1307 1-0068: rtc core: registered m41t00 as rtc0
[   12.813679] cdns-i2c e0005000.i2c: 400 kHz mmio e0005000 irq 80
[   12.872517] usb 1-1: new high-speed USB device number 2 using zynq-ehci
[   12.964301] lm75 1-0048: hwmon0: sensor 'lm75'
[   13.017421] cdns-wdt f8005000.watchdog: Xilinx Watchdog Timer at f007e000 with timeout 10s
[   13.115974] zynq-edac f8006000.memory-controller: ecc not enabled
[   13.188756] Xilinx Zynq CpuIdle Driver started
[   13.242008] sdhci: Secure Digital Host Controller Interface driver
[   13.315708] sdhci: Copyright(c) Pierre Ossman
[   13.367778] sdhci-pltfm: SDHCI platform and OF driver helper
[   13.435677] sdhci-arasan e0101000.sdhci: No vmmc regulator found
[   13.507359] sdhci-arasan e0101000.sdhci: No vqmmc regulator found
[   13.580438] hub 1-1:1.0: USB hub found
[   13.625282] hub 1-1:1.0: 4 ports detected
[   13.692519] mmc0: SDHCI controller 上 e0101000.sdhci [e0101000.sdhci] using ADMA
[   13.780288] sdhci-arasan e0100000.sdhci: No vmmc regulator found
[   13.854049] sdhci-arasan e0100000.sdhci: No vqmmc regulator found
[   13.962499] mmc1: SDHCI controller 上 e0100000.sdhci [e0100000.sdhci] using ADMA
[   14.050426] usbcore: registered new interface driver usbhid
[   14.066036] mmc0: BKOPS_EN bit is not set
[   14.068074] mmc0: new high speed MMC card at address 0001
[   14.068396] mmcblk0: mmc0:0001 016G70 14.6 GiB
[   14.068484] mmcblk0boot0: mmc0:0001 016G70 partition 1 4.00 MiB
[   14.068568] mmcblk0boot1: mmc0:0001 016G70 partition 2 4.00 MiB
[   14.068651] mmcblk0rpmb: mmc0:0001 016G70 partition 3 4.00 MiB
[   14.127354]  mmcblk0: p1 < p5 p6 p7 p8 p9 p10 p11 p12 >
[   14.131021]  mmcblk0boot1: unknown partition table
[   14.132196]  mmcblk0boot0: unknown partition table
[   14.671948] usbhid: USB HID core driver
[   14.719329] Netfilter messages via NETLINK v0.30.
[   14.774736] ip_set: protocol 6
[   14.811324] TCP: cubic registered
[   14.850725] NET: Registered protocol family 17
[   14.904018] Registering SWP/SWPB emulation handler
[   14.961137] usb 1-1.1: new high-speed USB device number 3 using zynq-ehci
[   15.043392] rtc-ds1307 1-0068: setting system clock to 2017-04-06 16:07:52 UTC (1491494872)
[   15.156352] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
[   15.252293] VFS: Mounted root (ext4 filesystem) 上 device 179:9.
[   15.325280] devtmpfs: mounted
[   15.359929] Freeing unused kernel memory: 232K (c05e7000 - c0621000)
[   15.364071] hub 1-1.1:1.0: USB hub found
[   15.364654] hub 1-1.1:1.0: 4 ports detected
[   15.542716] usb 1-1.2: new high-speed USB device number 4 using zynq-ehci
m▒  15.779690] hub 1-1.2:1.0: 4 ports detected-1.2:1.0: USB hub found

INIT: version 2.88 ACS8000 init
Starting init_acs8000.sh
boot from hardware - mount /var in RAM disk
Starting init_hw_boot.sh
[   16.803049] EXT4-fs (mmcblk0p9): re-mounted. Opts: (null)
Current boot image: 1.
[   16.920543] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
Completed init_hw_boot.sh
[   17.151462] random: nonblocking pool is initialized
Console speed is 9600
[   17.360932] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null)
Completed init_acs8000.sh
Starting udev
unitdata ...
bootlogd: cannot allocate pseudo tty: No such file or directory
checkroot ..
 ramdisk ...
mountall ...
Populating volatile Filesystems.
devpts ...
/etc/init.d/rc: Called, Params: start
Hostname: 'ACS8032-0530044575'
Calling modprobe for IPv6
Setting up IP spoofing protection: rp_filter.
Enabling packet forwarding... done.
Configuring network interfaces... udhcpc (v1.22.1) started
Updating LLDP services IP address information
return code is 0
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Sending discover...
Updating LLDP services IP address information
return code is 0
No lease, failing
RTNETLINK answers: No such process
done.
 mountnfs ...
net.ipv4.conf.default.rp_filter = 1
net.ipv4.conf.all.rp_filter = 1
 Finish ...
 Making root file system read-only.
INIT: Entering runlevel: 5
Waiting for /dev to be fully populated ... done.
Starting cacpd: cacpd.
Starting event notification:event_notify.
Starting GSP connection API daemon.
Starting uicontrold: uicontrold.
Starting adsap2d: Fork Successful. Retval: 0
adsap2d.
Starting sshd:done.
Starting rpcbind daemon...done.
starting statd: done
NFS daemon support not enabled in kernel
Starting network management services: snmpd.
Starting internet superserver: xinetd.
Starting aidpd: Fork Successful. Retval: 0
aidpd.
Starting environd: Fork Successful. Retval: 0
environd.
starting Busybox Periodic Command Scheduler: crond... done.
Starting Data Buffering daemon.
dial-in daemon successfully started with PID 1580.
Starting logpipe: logpipe.
Starting Socket Client  daemon.
Starting wireless modem daemon.
GSP Serial Daemon successfully started with PID 1771.
Starting NTP Client.
Starting power management service.
Starting strongSwan 5.2.1 IPsec [starter]...
Starting LLDP services
LLDP is not enabled.
return code is 0
Starting web server: apache2.
/etc/init.d/rc: Called, Params: start

ACS8000 1.0.1-20160921 ACS8032-0530044575 /dev/ttyPS0


login: Starting watchdog timer

login: 管理员
Password:
Welcome to ACS8000 <ACS8032-0530044575>.
Type help for more information.


--:- / cli->
--:- / cli->
--:- / cli-> wiz
current ipv4 address: 0.0.0.0
current ipv6 address: fe80:0000:0000:0000:02e0:86ff:fe29:15a8
eth0:
device_status = enabled
ipv4_method = dhcp
ipv4_address = 192.168.160.10
ipv4_mask = 255.255.255.0
ipv4_default_gateway =
enable_lldp = no
ipv6_method = stateless
ipv6_address =
ipv6_prefix_length =
ipv6_default_gateway =
mac address: 00:e0:86:29:15:a8
dns:
primary_dns =
secondary_dns =
domain =
hostname = ACS8032-0530044575
ipv6:
Note: Enabling or disabling IPv6 requires a reboot to be effective.
enable_ipv6 = yes
-- MORE --:
get_dns_from_dhcpv6 = no
get_domain_from_dhcpv6 = no

Some basic and useful keys are:
 - tab (once/twice) - shows the next possible option(s)
 - cntrl e - gets the current parameter value for editting
Other hints:
 - Use backslash '\' to escape spaces, '\' and other control
   characters when assigning values to parameters.

current ipv4 address: 0.0.0.0
current ipv6 address: fe80:0000:0000:0000:02e0:86ff:fe29:15a8
eth0:
device_status (disabled,enabled) [enabled] : enabled
ipv4_method (dhcp,ipv4_address_unconfigured,static) [dhcp] : static

static:
ipv4_address [192.168.160.10] : 10.9.2.14
ipv4_mask [255.255.255.0] : 255.255.254.0
ipv4_default_gateway : 10.9.2.1
enable_lldp (no,yes) [no] : yes
ipv6_method (dhcpv6,ipv6_address_unconfigured,stateless,static) [stateless] :
mac address: 00:e0:86:29:15:a8
dns:
primary_dns : 10.9.6.5
secondary_dns : 10.9.6.6
domain : gi-de.com
hostname [ACS8032-0530044575] : AVS-VOGELL
ipv6:
enable_ipv6 (no,yes) [yes] : no
current ipv4 address: 0.0.0.0
current ipv6 address: fe80:0000:0000:0000:02e0:86ff:fe29:15a8
eth0:
device_status = enabled
ipv4_method = static
ipv4_address = 10.9.2.14
ipv4_mask = 255.255.254.0
ipv4_default_gateway = 10.9.3.1
enable_lldp = yes
ipv6_method = stateless
ipv6_address =
ipv6_prefix_length =
ipv6_default_gateway =
mac address: 00:e0:86:29:15:a8
dns:
primary_dns = 10.9.6.5
secondary_dns = 10.9.6.6
domain = gi-de.com
hostname = AVS-VOGELL
ipv6:
Note: Enabling or disabling IPv6 requires a reboot to be effective.
enable_ipv6 = no
-- MORE --:
get_dns_from_dhcpv6 = no
get_domain_from_dhcpv6 = no
Are all these parameters correct? (no, yes, quit)  [no] : yes
--:- / cli->
Broadcast message from [email protected] (Thu Apr  6 16:16:59 201▒:

The system is going down for system halt NOW!
INIT: Sending processes the TERM signal

INIT: Sending processes the KILL signal
Stopping cacpd: cacpd.
stopping Busybox Periodic Command Scheduler: crond... done.
Signal Terminated sent to dial-in daemon.
Stopping GSP connection API daemon.
GSP Serial Daemon killed, PID file removed.
Stopping logpipe: logpipe.
Stopping power management service.
stopped process in pidfile '/var/run/pmdng.pid' (pid 2026)
Stopping wireless modem daemon.
Stopping Data Buffering daemon.
Stopping event notification:event_notify.
Stopping socket client daemon.
Stopping uicontrold: uicontrold.
Stopping adsap2d: adsap2d.
Stopping sshd:stopped /usr/sbin/sshd (pid 1365)
done.
Stopping web server: apache2.
stopping mountd: done
stopping nfsd: done
Stopping network management services:stopped /usr/sbin/snmpd (pid 4481)
no /usr/sbin/snmptrapd found; none killed
 snmpd, snmptrapd.
Stopping internet superserver: xinetd.
stopping statd: done
Stopping LLDP services
return code is 0
Stopping strongSwan IPsec...
Stopping aidpd: aidpd.
Stopping environd: environd.
Calling modprobe for IPv6
Deconfiguring network interfaces... ifdown: interface eth1 not configured
done.
Stopping rpcbind daemon...
done.
Stopping NTP Clientstart-stop-daemon: warning: killing process 1982: No such process
.
Sending all processes the TERM signal...
Sending all processes the KILL signal...
[  584.181968] watchdog watchdog0: watchdog did not stop!
Syncing hardware clock to system time
Unmounting remote filesystems...
Unmounting local filesystems...
mount: can't find /mnt/ram in /etc/fstab
 halt ...
[  587.443969] reboot: System halted
[  587.482632] System Halted, OK to turn off power



2.使用浏览器完成“首次配置”屏幕,以访问在步骤1中配置的IP地址

步骤1 –安全配置文件

选择所需的安全配置文件。请点击
接下来完成时。

Avocent ACS8000安全配置文件

步骤2 –网络参数

设置所需的网络参数。请点击
接下来完成时。

Avocent ACS8000 网络配置

步骤3 –端口

默认的CAS配置文件配置
将应用于所有串行端口。设置
所需的CAS配置文件参数。默认,
所有端口均已启用。单击下一步
完成。

Avocent ACS8000端口配置

步骤4 –更改root / 管理员
密码并添加新用户
单击“用户”表中的根链接。
输入并确认新密码
然后单击下一步。点击管理链接。输入
并确认新密码,然后单击
下一个。点击保存以应用并保存
配置,然后单击完成。

Avocent ACS8000用户配置

现在已配置控制台系统,并且
准备接受用户及其连接
端口。

 

Avocent ACS8000系统配置

 

Avocent ACS8000串行端口

参考:

通过 约翰

发表评论